Pex Insert Fittings
3/4" Brass Barb x 1/2" Male Pipe Thread, Lead Free, Pex Adapter, For Use With Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
3/4" Brass Pex Barb x 3/4" Male, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
3/4" Brass Pex Barb x 3/4" Female, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
SharkBite 3/4"x1/2"x3/4" Brass Lead-Free Barb Pex Tee. It is for use with Pex tubing and connected with stainless steelcinch clamps and cinch tool TV# 608743. It meets ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 foruse in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated. The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight. It meets AB1953 California & VT S152 Vermont low lead restrictions. Comes in Bagged Packaging.
3/8" x 3/8", Lead Free, Brass Barb Pex Coupling, For Use With Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool TV #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF Cal-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit, Hot Water Can Be Constantly Re-Circulated, Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
Egyptian Bronze, Single Screw, Handrail Bracket, Contemporary Design, Projection 2-3/4" On Center, Holds Handrail At Any Angle, Suitable For Any Decor, Mounting Screws Included, Carded.
Egyptian Bronze, Door Security Guard, Designed For Added Security & As A Decorative Accent In Houses & Apartments, Partial Opening Of The Door Is Permitted For Ventilation Or Viewing While Resisting Possible Forced Entry.
1/2" Lead Free Brass Barb Insert x 1/2" Male Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Female Iron Pipe Thread Pipe End Or Fitting, Secure Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2", Lead Free Brass Barb Insert Coupling, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Male Iron Pipe Thread Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert x 3/4" Male Pipe Thread Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 3/4" Female Iron Pipe Thread Pipe End Or Fitting, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Swivel Plastic Nut Faucet Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Male Iron Pipe Thread Faucet Shank, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle, Secure Barb Ends Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Swivel Plastic Nut Faucet Adapter Elbow, For Connecting 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle To 1/2" Male Iron Pipe Thread Faucet Shank, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV # 608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert Tee, For Connecting 3 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, 1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Swivel Plastic Nut Faucet Adapter Elbow, For Connecting 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle To 1/2" Male Iron Pipe Thread Faucet Shank, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S15.